UNIMIG RAZOR 250 SWF MIG TIG STICK WELDER with SWF KUMJR250SWF

The RAZOR MULTI PROCESS SWF series is designed for maximum performance, offering the highest quality of welds from UNIMIG’s range, with the added flexibility of a Separate Wire Feeder unit.

The MIG250SWF is The RAZOR™ 250 SWF is a powerful workshop machine with MIG, TIG and STICK welding functions. This machine features the added flexibility of a Separate Wire Feeder unit, allowing up to 10m of extra manoeuvrability in the workshop.  

MULTI PROCESS WELDING:This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup. 

FOUR GEARED WIRE DRIVE:This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches. 

SEPARATE WIRE FEEDER:Don’t get tied down. A separate wire feeder unit lets you remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option. 

SPOOL GUN READY: This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.

PUSH-PULL READY: Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.

HIGHEST QUALITY WELDS: Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.

Designed and built to our specification. Certified to – AS/NZ60974-1

Key Features

• Latest IGBT inverter technology
• MIG/MAG with Gas and Gasless wire function
• VRD (Voltage Reduction Device)
• MMA
• DC TIG welding with lift arc start
• Stepless Voltage & Wire Speed controls at wire feeder
• Variable Inductance
• Burn Back control
• 2T/4T trigger function
• Adjustable Crater Current function
• Gas Check
• Wire Inch
• Digital Volt / Amp meters
• Geared 4 roll wire feeder
• Euro style MIG torch connection
• 10m interconnecting cables
• Heavy duty trolley with tool draw
• Spool Gun / Push Pull Ready
• 3 years warranty (*Please note warranty only applies to the power source only)

WHAT CAN IT WELD
- Steel
- Stainless Steel
- Aluminium
- Copper
- Cast Iron
- Low Hydrogen

PACKAGE CONTENTS

1 x Razor MIG 250 SWF Power Source

1 x SWF Wire Feeder

1 x SB24 4 metre MIG Torch

1 x 10 metre Arc Welding lead set including twist lock electrode holder & 500 Amp earth clamp

1 x 10 metre Interconnecting cables

1 x MIG Trolley

1 x UNIMIG Twin Gauge Argon Regulator

1 x 2 metre Gas Hose with connections

1 x Instruction Manual

SPECIFICATIONS:

Part Number: KUMJR250SWF

Primary Input Voltage: 240V 1 Phase

Rated Input Power : 10.8 KVA

ieff AMPS: 26.6A MIG / 28.0A MMA

Rated Output MIG: 30A/15.5V - 250A/26.5V

Rated Output MMA 10A/20.4V - 250A/30.0V

Welding Current Range 10 - 250 Amps

Duty Cycle 40 Deg C - MIG 35% @ 250 Amps

Duty Cycle 40 Deg C - MMA 35% @ 225 Amps

Dimensions: 630 x 235 x 420mm

Weight Power Source: 40.6 kg

Weight Wire Feeder: 14 kg.